preliminary gan solid state microwave generator r if 252k - 40t korean facilities : 82 - 31 - 8069 - 30 36 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 1 / 4 version 0.1 product features application s ? 2400 ~ 2500mhz (ism band) ? 2kw cw peak power ? using gan on sic hemt transistors ? 50 % system efficiency ? high reliability & stability, long - run operation ? high frequency - stability with pll technology ? accurate adjust ment function on output power, phase, frequency ? very good frequency spectrum even at low power ? building b lock for h igh - power s ystems ? plasma g enerat or ? mw heating and drying ? microwave cvd ? microwave s intering ? m icrowave c hemistry ? materials pro cessing ? study of b iological p henomena ? s emiconductor equipment description the rif252k - 40t uses gan on sic hemt technology which performs high breakdown voltage and high efficiency . this product is packaged in a rack mountable shelf with the water c ooling system. a nd this product is designed for high power ism( industrial, scientific, medical) applications with adjustable power up to 2kw. this microwave generator is suitable for use in cw, pulse and linear applications. this high efficiency rugged dev ice is targeted to replace i ndustrial magnetrons and other vacuum tubes currently powering industrial heating, drying, m icrowave cvd and sintering . electrical specifications parameter unit min typ max s ymbol operating frequency mhz 2400 - 2500 f o cw variable output power w 200 - 2000 po operating bandwidth mhz - 100 - obw system efficiency % 50 - - eff pulse duty cycles % 1 - 99 - control range of f requency mhz 2400 - 2500 - f requency resolution khz - 100 - - absolute frequency accuracy ppm - 2.5 - 2. 5 - frequency stability ppm - 2.5 - 2.5 - phase adjustment d eg. 0 - 360 - operating voltage va c 400 vac 3 phase 50/60 hz - controls generator on / off - e nabled / d isabled - output p ower c ontrol 10 to 100 % (input) generator a larm 1 or more outputs to indicate alarm condition / code (output) control interface rs232
preliminary gan solid state microwave generator r if 252k - 40t korean facilities : 82 - 31 - 8069 - 30 36 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 2 / 4 version 0.1 n ote dimensions and connectors may be subjected change. parameter unit value dimensions (l w h) mm 576 .2 4 82.6 14 0 weight kg tbd rf input connectors - sma, female rf output connectors - wr340 waveguide i/o connector - d- sub 9pin dc connector - d- sub 3w3 cooling - water cooling ( w ater pressure : 8bar) power s helf exterior & m echanical drawing n ote connector positions and module mount holes may be subjected change. m echanical specifications
preliminary gan solid state microwave generator r if 252k - 40t korean facilities : 82 - 31 - 8069 - 30 36 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 3 / 4 version 0.1 performance chart fig.1 output power vs current, efficiency of the RIF252K-40T fig. 2 saterate d output power an d efficiency of the RIF252K-40T
preliminary gan solid state microwave generator r if 252k - 40t korean facilities : 82 - 31 - 8069 - 30 36 / rfsales@rfhic.com all specifications may change without notice us facility : 919 - 677 - 8780 / sales@rfhicusa.com 4 / 4 version 0.1 revision history part number release date version description data sheet status rif252k- 40t april , 201 8 0.1 initial release of datasheet preliminary rf hic corporation reserves the right to make changes to any products herein or to discontinue any product at any time without notice. while product specifications have been thoroughly examined for reliability, rfhic corporation strongly recommends buyers to verify that the information they are using is accurate before ordering. rfhic corporation does not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. rfhic products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold rfhic corporation and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorized use. sales, inquiries and support should be directed to the local authorized geographic distributor for rfhic corporation. for customers in the us, please contact the us sales team at 919- 677-8780 . for all other inquiries, please contact the international sales team at 82-31-8069- 30 36.
|
